Audi A6 Owners & Service Manuals
Audi A6 Typ 4G (2011–2018) Workshop Manual / Heating, Ventilation & Air Conditioning / Warnings when Working on Vehicles with High Voltage System

Audi A6 Typ 4G: Warnings when Working on Vehicles with High Voltage System

Working on Vehicles with High-Voltage System (Hybrid Vehicles)

Extremely Dangerous Due to High-Voltage

The high-voltage system is under high-voltage. Death or serious bodily injury by electric shock.

- Individuals with electronic/medical life- and health sustaining machines in or on their person cannot perform any work on high-voltage systems. Life- and health sustaining machines are for example pain killer pumps, implanted defibrillators, pacemakers, insulin pumps, and hearing aids.

- Have the high-voltage system de-energized by a qualified person.

There is a Risk of Injury from the Engine Starting Unexpectedly

On electric - hybrid vehicles an active ready mode is difficult to identify. Parts of the body can be clamped or pulled.

- Turn off the ignition.

- Place the ignition key outside of the vehicle interior.

Risk of Damaging the High-Voltage Cables

Misuse can damage the insulation of high-voltage cables or high-voltage connectors.

- Never support objects on the high-voltage cables and the high-voltage connectors.

- Never support tools on the high-voltage cables and the high-voltage connectors.

- Never sharply bend or kink the high-voltage cables.

- When connecting pay attention to the coding of the high-voltage connectors.

Further information about the high-voltage system.

Performing a Visual Inspection of Damage to High Voltage Components and Cables

Extremely Dangerous Due to High-Voltage

The high-voltage system is under high-voltage. Electrocution can cause death or very serious personal injury from damages high-voltage components and high-voltage cables.

- Perform a visual inspection of the high-voltage components and the high-voltage cables.

- Never use tools that are for cutting, deformed, or sharp edged.

- Never use welding, soldering, thermal adhesive or hot air.

Further information about the high-voltage system.

    READ NEXT:

     A/C System, General Information

     General Information

    Introduction The purpose of this repair manual is to provide service advisors and technicians with the basic knowledge needed to ensure professional and competent procedures.   Note Only the c

     A/C Technology Basic Principles

    Physical Principles The four known states of water also apply to air conditioning system refrigerants. 1 - Gaseous (invisible) 2 - Vapor 3 - Liquid 4 - Solid

    SEE MORE:

     Manual steering wheel position adjustment

    Applies to: vehicles with manual steering wheel adjustment The steering wheel position is adjustable up and down and forward and back. Fig. 76 Lever on the steering column Pull the lever in the direction of the arrow. Bring the steering wheel into the desired position. Push the lever against th

     Securing on Engine and Transmission Holder

    Special tools and workshop equipment required Engine And Transmission Holder -VW6095- Holding Plate -VW309A- Hook And Support Tool -T40197- Hook and Support Tool -T40294-   DANGER! Do not use the Hook And Support Tool T40197 for the repair (Refer to → Chapter "Sensor Module ,

    © 2011-2025 Copyright www.aa6.tochrfr.com