Audi A6 Owners & Service Manuals
Audi A6 Typ 4G (2011–2018) Workshop Manual / Heating, Ventilation & Air Conditioning / Pressures, Checking

Audi A6 Typ 4G: Pressures, Checking

READ NEXT:

 General Information

Vehicles with a High Voltage System (Hybrid Vehicles) Extremely Dangerous Due to High-Voltage The high-voltage system is under high-voltage. Death or serious bodily injury by electric shock. - I

 Refrigerant Circuit, Checking Pressure with Service Station

General Information   Note All test conditions marked * are vehicle-specific and are described in the Repair Manual for the relevant vehicle. Check cooling performance. Connections with val

 Checking Pressures for Vehicles with Restrictor and Reservoir (with Internally Regulated Compressor)

General Information   Note Connect the A/C service station. Refer to → Chapter "A/C Service Station, Connecting". Observe the test requirements. Refer to → Chapter "Pressures,

SEE MORE:

 Completing AdBlue refill

Applies to: vehicles with selective catalytic reduction Closing the filler neck Turn the cap on the filler neck to the right with the wheel wrench until the cap clicks into place. This tightens the cap to the specification. Then press on the left side of the tank door until it latches. After

 Identification

Final Drive Identification Final Drive Identification, 0BC The 0BC rear final drive unit is used with the following transmissions: 6-Speed Manual Transmission 0B2 All Wheel Drive (AWD) 6-Speed Manual Transmission 0B4 All Wheel Drive (AWD) 7-Speed DSG Transmission 0B5 All Wheel Drive (AWD) Auto

© 2011-2025 Copyright www.aa6.tochrfr.com