Audi A6 Typ 4G: Speed warning system
Applies to: vehicles with speed warning system
The speed warning system helps you to stay under
a specified maximum speed.
The .12.png)
(USA models)/
.13.png)
(Canada models) indicator
light and a message appear in the instrument
cluster display at the same time. The
.14.png)
/
.15.png)
indicator light and the message
turn off if the speed falls back below the stored maximum speed.
Setting a threshold is recommended if you would
like to be reminded when you reach a certain
maximum speed. Situations where you may want
to do so include driving in a country with a general
speed limit or if there is a specified maximum
speed for winter tires.
Setting the warning threshold
The warning threshold is set in the Infotainment
system.
- Select: the [CAR] function button > (Car) Systems
control button > Driver assistance >
Speed warning.
Tips
Regardless of the speed warning system, you
should always monitor your speed using the
speedometer and make sure you are following
the legal speed limit.
READ NEXT:
Switching on
Applies to: vehicles with cruise control system
The cruise control system makes it possible to
drive at a constant speed starting at 20 mph (30
km/h).
Fig. 88 Operating lever: cruise con
Applies to: vehicles with cruise control system
To increase or decrease the speed in increments,
tap the lever toward
fig. 88.
To increase or decrease the speed quickly, hold
the lever in the
Description
Applies to: vehicles with Audi adaptive cruise control
Fig. 89 Detection range
The adaptive cruise control system is a combination
of speed and distance regulation. It assists
the driver
SEE MORE:
Rear Lid, Adjusting, Gap Dimensions
Special tools and workshop equipment
required
Gauge - Gap Adjustment -3371-
Gap Dimensions on the Sedan
The gap dimensions can be checked with the Adjustment Gauge -3371-.
Dimension -A- = 3.5 mm
Dimension -B- = 5.5 mm
Dimension -C- = 2.2 mm
Dimension -D
Subframe, Securing, FWD
Certain repairs on a vehicle require the removal of the
subframe or the complete rear axle. The original position of the
subframe to the body can be maintained with assistance of the
Subframe Locating Pins -T40242-. The Subframe Locating Pins
-T40242- must always be insta
