Audi A6 Typ 4G: Body Front
READ NEXT:
Overview - Lock Carrier
Overview - Lock Carrier, Vehicles through MY 2014
1 - Bolt
8 Nm
2 - Spring Nut
3 - Lock Carrier
For the correct allocation. Refer to the Pa
Overview - Fender
1 - Bolt
10 Nm
Quantity: 2
2 - Lower Bracket
For the fender
Removing and installing. Refer to
→ Chapter "Lower Fender Bracket, Removing and Inst
Overview - Bulkhead
1 - Seal
Install on the plenum chamber bulkhead
2 - Lock Washer
Quantity: 2
3 - Nut
4 Nm
4 - Plenum Chamber Bulkhead
There are
SEE MORE:
Divided Rear Seat Backrest, Removing and Installing
Note
The following describes removing and installing the right
2/3 section of the backrest. Removing and installing the left
1/3 rear seat backrest is identical.
Special tools and workshop equipment
required
Trim Removal Wedge -3409-
Bumper Cover, Removing and Installing, Vehicles through MY 2014
Removing
- Remove the bolts -5-.
- Remove the bolts -1, 2 and 3-
on the bumper cover side plates -4-.
- Remove the cover in the luggage compartment side trim panel.
- Vehicles with a trailer hitch: Remove the cable
Lock Carrier
