Audi A6 Typ 4G: Body Exterior
READ NEXT:
High Voltage Vehicles Safety Precautions
General Safety Precautions for the High Voltage System
Note
Check with the importer is there are any questions regarding
the titles "high voltage tech
Wire Routing and Securing
When loosing or removing and installing hydraulic, pneumatic or electrical
lines, draw sketches or take pictures. This will ensure they are installed in
their original posi
SEE MORE:
Special tools and workshop equipment
required
Wedge Set -T10383-
Removing
- Switch the ignition off and remove the ignition key.
- Remove the interior door mechanism trim. Refer to
→ Chapter "Trim Molding, Removing and Installing".
- Remove the bolts -1 to 3-.
Note
Overview - Driver Side Airbag
1 - Locking Bracket
Use a T25 TORX screwdriver, approximately 100 mm long
2 - Steering Column Electronics Control Module -J527-
With Airbag Spiral Spring/Return Spring with Slip Ring -F138- and
Steering Angle Sensor -G85-
Removing and instal
Safety Precautions
