Audi A6 Typ 4G: Glass, Window Regulators
READ NEXT:
Minimum Curing Time for Bonded Windows
WARNING
For safety reasons, use only electrically
non-conductive 2C-adhesive when installing windshield
and rear window using the materials listed b
Overview - Windshield
1 - Windshield
Distance to the roof, dimension -a- = 2
mm
Center the side distance to the A-pillars.
2 - Adhesive Bead
Observe the minimum curing tim
Overview - Rear Window
Overview - Rear Window, Sedan
Note
Certain connections are included with the replacement rear
window that are meant to be used only for certain optional
equipment.
SEE MORE:
Overview - Stabilizer Bar
1 - Bolt
40 Nm +90º turn
Always replace if removed
Must be tightened in the curb weight position. Refer to
→ Chapter "Wheel Bearing in Curb Weight, Lifting Vehicles with Coil
Spring".
2 - Coupling rod
Removing and installing. Refer to
WARNING
During road tests using a vehicle diagnostic and
information system, there is the hazard of extreme to
lethal injuries!
If vehicle diagnostic and information system is
deposited in the action area of an airbag during a road
test, here is the hazard of extreme to lethal injuri
Repair Information
