Audi A6 Typ 4G: Body Interior
READ NEXT:
Note
Pyrotechnic components:
Airbag units
Belt tensioner
Belt force limiter (depending on equipment)
Battery cut-off components (depending on equipment)
General
Caution
Testing, as
All damaged securing pieces must be replaced, you cannot
reshape components or "make them fit".
The following components must be checked after every airbag
deployment.
With A Passenger Airbag Deploy
SEE MORE:
Camber cannot be adjusted.
Camber can be centered evenly within specified tolerance
range by shifting subframe.
- Remove the noise insulation -1 and 2-.
Refer to
→ Body Exterior; Rep. Gr.66; Noise Insulation; Noise Insulation,
Removing and Installing.
- If installed: r
Work procedure may vary depending on the type of tools
selected (the tool-specific operating instructions should
therefore be followed).
The refrigerant circuit is to be discharged if parts of the
refrigerant circuit are to be removed, if there is any doubt
about the quantity of refrigerant i
Pyrotechnic Components Safety Precautions
