Audi A6 Typ 4G: Emergency situations
READ NEXT:
This chapter is intended for trained emergency
crews and working personnel who have the necessary
tools and equipment to perform these
operations.
Starting by pushing or towing
Note
Vehicles with an a
Make sure to connect the jumper coble clomps in
exactly the order described below!
Fig. 208 Engine compartment: connectors for jump start
cables and charger
Fig. 209 Jump starting with the battery o
General hints
Your Audi requires special handling for towing.
The following information is to be used by commercial
tow truck operators who know how to operate
their equipment safely.
Never tow your
SEE MORE:
Fig. 173 Tether strap: proper routing and mounting
Installing the tether strap
Release or deploy the tether strap on the child
restraint according to the child restraint manufacturer's
instructions.
Guide the upper tether strap under the rear
head restraint
fig. 173 (raise the head
restrai
1 - Hood
2 - Hood Hinge
Removing
Before removing a hood hinge, support the hood or secure it against
falling.
Remove the gas-filled strut. Refer to
→ Chapter "Gas-Filled Strut, Removing and Installing"
Remove the bolts -4- and nuts
-5-.
Installing
Align
General
