Audi A6 Owners & Service Manuals
Audi A6 Typ 4G (2011–2018) Owner's Manual / Maintenance and Care / Checking and Filling / Engine compartment overview

Audi A6 Typ 4G: Engine compartment overview

The most important check points.

Checking and Filling
Fig. 182 Typical location of the reservoir and the engine oil filler opening

  1. jump start point (-) with hex head screw
  2. jump start point (+) under a cover
  3. Engine oil label with VW standard
  4. Brake fluid reservoir
  5. Engine oil filling opening
  6. Coolant reservoir
  7. Washer fluid reservoir

The engine oil filling opening (item 5) may be located in a different area depending on the engine version.

WARNING

Read and follow the WARNINGS before checking anything in the engine compartment.

    READ NEXT:

     Engine oil

    Engine oil specifications The engine oil used must conform to exact specifications. The service interval display in the instrument cluster of your vehicle will inform you when it is time for an oil ch

     Engine oil consumption

    The engine in your vehicle depends on an adequate amount of oil to lubricate and cool all of its moving ports. In order to provide effective lubrication and cooling of internal engine components, all

     Checking the engine oil level and adding engine oil

    The engine oil level can be checked in the Infotainment system Fig. 183 Engine compartment: engine oil filler opening cover Checking the engine oil level Park the vehicle on a level surface. Shut

    SEE MORE:

     Selector lever positions

    Fig. 83 Instrument cluster: selector lever positions The selector lever position that is engaged is shown in the instrument cluster display. P - Park This selector lever position prevents the vehicle from rolling. You can only shift into Park when the vehicle is stationary. To shift in and out of t

     Wheel Bearing Housing, Removing and Installing

    Special tools and workshop equipment required Torque Wrench 1331 5-50Nm -VAG1331- Torque Wrench 1332 40-200Nm -VAG1332- Torque Wrench 1332 Insert - Ring Wrench - 21mm -VAG1332/7- Removing - Loosen the connection between the drive axle and wheel hub. Refer to → Chapter "Drive Axle

    © 2011-2026 Copyright www.aa6.tochrfr.com