Audi A6 Owners & Service Manuals
Audi A6 Typ 4G (2011–2018) Owner's Manual / Maintenance and Care / Checking and Filling

Audi A6 Typ 4G: Checking and Filling

READ NEXT:

 Gasoline

Fuel supply Applies to: vehicles with gasoline engine Using the right fuel helps keep the environment clean and prevents engine damage. Fuel recommendation The fuel recommended for your vehicle is unl

 Blended gasoline

Applies to: vehicles with gasoline engine Use of gasoline containing alcohol or MTBE (methyl tertiary butyl ether) You may use unleaded gasoline blended with alcohol or MTBE (commonly referred to as o

 Diesel fuel

Applies to: vehicles with diesel engine Always use ULSD (Ultra Low Sulfur Diesel) No. 2. The ULSD No. 2 meets the ASTM D975. Diesel fuel with concentrations of biodiesel higher than 5 % such as B ll

SEE MORE:

 Specified Values for the Refrigerant Circuit Pressures

  Note On vehicles with a high-voltage system but without a heat pump (for example on Audi A3 e-tron, Audi Q5 hybrid, Audi A6 hybrid and Audi A8 hybrid) no check valves are installed in the refrigerant circuit. On these vehicles valves are installed in the refrigerant circuit which regulat

 Wire Junction, Removing and Installing

Terminal 30 Wire Junction -TV2-, Removing and Installing Removing - With the ignition switched off, disconnect the ground cable from the battery. Refer to → Chapter "Battery, Disconnecting and Connecting". - Remove the tower brace. Refer to → Suspension, Wheels, Steering;&

© 2011-2026 Copyright www.aa6.tochrfr.com