Audi A6 Typ 4G: Trailer hitch
Applies to: vehicles with parking system plus/rearview camera/
peripheral cameras and trailer hitch
For vehicles using the trailer socket, the parking
system rear sensors are not activated when you
shift into reverse gear or when you press the
.65.png)
button. This results in the following restrictions.
Parking system plus
There is no distance warning for the rear. The
front sensors remain activated. The visual display
switches to trailer mode.
Rearview camera/peripheral cameras
There is no distance warning for the rear. The
front sensors remain activated. The visual display
switches to trailer mode. The rearview camera
image will not show the orientation lines and the
blue surfaces.
Tips
Trailer hitches that are not installed at the
factory may cause the parking system to malfunction
or they may restrict its function.
READ NEXT:
Description
Electronic Stabilization Control (ESC) supports
driver safety. It reduces the risk of slipping and
improves driving stability. ESC detects critical situations
such as the vehicle oversteer
New brake pads
New brake pads do not achieve their full braking
effect during the first 250 mi (400 km). They
must be "broken in" first.
Wear
Brake pad wear depends largely on the way the
vehicle is d
SEE MORE:
Overview - Hood
1 - Cover for the Right Hood Hinge
Clipped onto the side
2 - Hood
A second technician is needed to support and hold the hood during
removal and installation.
Removing
Remove the gas-filled strut from the hood. Refer to
→ Chapter "Gas-Filled Strut
Special tools and workshop equipment
required
Trim Removal Wedge -3409-
Removing
- Pry the instrument panel side cover
-1- off using the Trim Removal Wedge -3409--arrow-
and remove it.
Installing
Install in reverse order of removal. Note the following:
Installation notes, for example tigh
