Audi A6 Owners & Service Manuals
Audi A6 Typ 4G (2011–2018) Workshop Manual / Chassis / Wheel and Tire General Information

Audi A6 Typ 4G: Wheel and Tire General Information

READ NEXT:

 Specifications for Retrofitting Wheel and Tire Combinations (Documents)

Legal Requirements The manufacturer is granted general type approval for the whole vehicle including all parts and for specific retrofitting (general type approval according to 20 StVZO (Motor Vehi

 Wheel Bolt Tightening Specifications

  DANGER! To ensure that the wheel bolts fit correctly, be sure to use the correct wheel bolts specified for the model. The wheel bolts for each model have different diameters on the surface

 Acceptable Tread Depth Variance

Model with Longitudinally Installed Engine Tread variance for models with a longitudinally installed engine, such as A4, A5, A6, A7, A8, Q5, Q7, ... The variance between the front and rear axle in th

SEE MORE:

 Rear Lid Seal, Removing and Installing

Rear Lid Seal, Replacing Sedan 1 - Rear Lid 2 - Rear Lid Seal - To remove, remove seal from body flange.   Note Clean the body flange before installing a new seal. - When installing, align the seal with the joint -arrow- with the marking in the center of the ve

 Loosening and tightening the wheel bolts

The wheel bolts must be loosened before raising the vehicle. Fig. 197 Changing a wheel: loosening the wheel bolts Loosening Slide the wheel wrench onto the wheel bolt as far as it will go. Take tight hold of the end of the wrench handle and turn the wheel bolts counter-clockwise about one sin

© 2011-2026 Copyright www.aa6.tochrfr.com