Audi A6 Typ 4G: General, Technical data
READ NEXT:
PR Number Allocation - Brakes
The brake system installed in a vehicle is documented on the
vehicle data sticker via the relevant PR number.
Example of a vehicle data label:
A - Front Brakes
General Information
The operation takes place on a test stand.
When testing, manual transmission vehicles must be in idle
and automatic transmission vehicles must be in driving mode N.
Always fol
Brake Rotor Thickness
- Clean the brake rotor before determining the wear.
Note
The brake rotor vent holes must be free of brake dust and
dirt. It may be necessary to use a suitable tool
SEE MORE:
Removing
- Fold both rear seat backrests forward.
- Remove the screen separator -1-
to the right from out of the mounts -2-
on the right 2/3 of the rear seat backrest.
Installing
Install in reverse order of removal. Note the following:
- Position the screen separator -1-
and the mo
1 - Front Door
2 - Bolt
8 Nm
3 - Seal
For the door arrester
4 - Bolt
33 Nm
5 - Cap
For the door arrester
6 - Door Arrester
Removing and installing. Refer to
→ Chapter "Door Arrester, Removing and Installing".
7
Identification
