Audi A6 Typ 4G: Overview
.72.png)
Fig. 4 Driver information system in the instrument cluster
.73.png)
Fig. 5 Instrument cluster: example information line
The information in the driver information system
is shown in B tabs A
fig. 4. The
following
content is possible depending on vehicle equipment:
.74.png)
.75.png)
The second and third tabs are only visible if at
least one indicator light or message is shown or if
that system is switched on.
The status line C is located in the bottom part of
the display
fig. 4. It displays the
exterior temperature,
time, selector lever position, trip odometer
and odometer.
For some vehicle functions, you can access the
trip information from the temporary memory
in line 1
fig. 5.
WARNING
Do not assume the roads are free of ice based
on the outside temperature display. Be aware
that there may be ice on roads even when the
outside temperature is around 41 ºF (+5 ºC)
and that ice can increase the risk of accidents.
Tips
- You can select the units used for temperature,
speed and other measurements in the
Infotainment system.
- If your vehicle is stationary or if you are driving
at very low speeds, the temperature displayed
may be slightly higher than the actual
temperature outside due to the heat radiating
from the engine.
- For information on the audio/video and navigation
functions, refer to the separate Infotainment
system owner's manual.
READ NEXT:
The driver information system is operated using
the buttons on the multifunction steering wheel.
Fig. 6 Multifunction steering wheel: operating the driver
information system
Fig. 7 Instrument cluste
Fig. 8 Instrument cluster: fuel consumption display
You can call up the following information in the
on-board computer:
Date
Driving time from the short-term memory
Average consumption from the s
Applies to: vehicles with efficiency program
Fig. 9 Instrument cluster: other equipment
Fig. 10 Instrument cluster: economy tip
The efficiency program can help you to use less
fuel. It shows other c
SEE MORE:
The child safety lock prevents the rear doors
from being opened from the inside and the rear
power windows from be operated.
Fig. 31 Section of driver's door: child safety lock buttons
To activate/deactivate the inner door handle
and the power window switch for the respective
rear door, press t
Removing
- Open the cover in the luggage compartment right trim panel.
- Disconnect the control module connectors
-1-.
- Release the tab -arrow- and
remove the control module.
Installing
Install in reverse order of removal.
Engine Hood Contact Switch -F266-, Removing and Installing