Audi A6 Typ 4G: Overview - Front Door Trim Panel
Note
The driver side front door trim panel is shown in the illustration.
The door trim panel on the front passenger side is identical.
1 - Door Trim Panel
- Removing and installing. Refer to
→ Chapter "Front Door Trim Panel, Removing and Installing".
- When replacing the door trim panel, a hole for the sleeve
-15- must be made in the new panel using
the old panel as a sample.
2 - Rear Reflector
- Driver side equipment level: Driver Door Warning Lamp -W30-
- Front passenger side equipment level: Front Passenger Door Warning
Lamp -W36-
- Door warning lamps, removing and installing. Refer to
→ Electrical Equipment; Rep. Gr.96; Lamps; Driver/Front Passenger Door
Warning Lamp W30/W36, Removing and Installing.
3 - Alarm System Deactivation Switch -E217-
- Equipment levels
- Removing and installing. Refer to
→ Electrical Equipment; Rep. Gr.96; Controls; Alarm System Deactivation
Switch E217, Removing and Installing.
4 - Insulation
5 - Clip
- With seal
- For door trim
- Quantity: 7 one-piece
- Quantity: 1 two-piece
- Replace any damaged two-piece clips
WARNING
- For proper crash sensor (pressure sensor) function, ensure
door does not leak.
- The door trim clips seal the system. Replace the door trim
clips if necessary.
6 - Bolt
- 1.2 Nm
- For pull handle/armrest
- Quantity: 13
7 - Bolt
8 - Clip
- For door trim
- With door frame bolted together
9 - Driver Door Ambient Lighting Bulb -L164-
- Front passenger side: Front Passenger Door Ambient Lighting Bulb
-L165-
- Equipment levels
- Removing and installing. Refer to
→ Electrical Equipment; Rep. Gr.96; Lamps; Driver and Front Passenger
Door Ambient Lighting Bulb L164/L165, Removing and Installing
10 - Bolt
- 1.2 Nm
- For inside door release mechanism
- Quantity: 7
11 - Driver Interior Locking Switch -E150-
- Passenger side: Front Passenger Interior Locking Switch -E198-
- Removing and installing. Refer to
→ Electrical Equipment; Rep. Gr.96; Controls; Overview - Front Door
Controls.
12 - Interior Door Mechanism
- Removing and installing. Refer to
→ Chapter "Interior Door Mechanism, Removing and Installing".
13 - Driver Memory Seat Control Head -E97-
- Front passenger side: Front Passenger Memory Seat Control Head
-E277-
- Equipment levels
- Removing and installing. Refer to
→ Electrical Equipment; Rep. Gr.96; Controls; Driver/Front Passenger
Memory Seat Control Head E97/E277, Removing and Installing.
14 - Central Locking -Safe- Indicator Lamp -K133-
- Driver door only
- Removing and installing. Refer to
→ Electrical Equipment; Rep. Gr.96; Lamps; Central Locking -SAFE-
Indicator Lamp K133, Removing and Installing
15 - Sleeve
- For Central Locking -SAFE- Indicator Lamp -K133-
- Driver door only
- When replacing the door trim panel, a hole for the sleeve must be
made in the new panel using the old panel as a sample
16 - Trim Panel
- For the window frame
- Removing and installing. Refer to
→ Chapter "Window Frame Trim, Removing and Installing".
17 - Stop
18 - Inner Cover
- Removing and installing. Refer to
→ Chapter "Mirror Cover Trim, Removing and Installing".
- Clip it into the window frame trim
19 - Lane Change Assistance Button -E530-
- Equipment levels
- Removing and installing. Refer to
→ Electrical Equipment; Rep. Gr.96; Lane Change Assistance; Lane Change
Assistance Button E530, Removing and Installing.
20 - Bolt
21 - Trim
- For inside door release mechanism
- Removing and installing. Refer to
→ Chapter "Trim Molding, Removing and Installing".
22 - Speaker Trim
- For midrange speaker
- Removing and installing. Refer to
→ Chapter "Midrange Speaker Trim, Removing and Installing".
- Insert in the door trim panel and press on it until it engages
audibly.
23 - Bolt
24 - Trim
- For Rear Lid Remote Release Button -E233-
- driver door only
- Removing and installing. Refer to
→ Electrical Equipment; Rep. Gr.96; Controls; Rear Lid Remote Release
Button E233, Removing and Installing.
- Press on until it engages audibly
25 - Rear Lid Remote Release Button -E233-
- Removing and installing. Refer to
→ Electrical Equipment; Rep. Gr.96; Controls; Rear Lid Remote Release
Button E233, Removing and Installing.
26 - Speaker Trim
- For bass speaker
- Removing and installing. Refer to
→ Chapter "Bass Speaker Trim, Removing and Installing".
- Press on until it engages audibly
27 - Symbol Trim
28 - Mirror Adjusting Switch -E43-
- Vehicles equipped with: Folding Mirror Adjustment Switch -E168-
- Removing and installing. Refer to
→ Electrical Equipment; Rep. Gr.96; Controls; Overview - Front Door
Controls.
29 - Bolt
30 - Pull Handle/Armrest
- Removing and installing. Refer to
→ Chapter "Front Armrest, Removing and Installing".
31 - Power Window Control Head in Driver Door -E512-
- Front passenger side: Front Passenger Door Window Regulator Switch
-E107-
- Removing and installing. Refer to
→ Electrical Equipment; Rep. Gr.96; Controls; Power Window Control Head
In Driver Door E512, Removing and Installing.
32 - Grip Recess
- With switch mount
- Removing and installing. Refer to
→ Chapter "Button Trim, Removing and Installing".
33 - Left Front Entry Lamp -W31-
- Front passenger side: Right Front Entry Lamp -W32-.
- Equipment levels
- Removing and installing. Refer to
→ Electrical Equipment; Rep. Gr.96; Lamps; Left/Right Front Entry Lamp
W31/W32, Removing and Installing.
34 - Driver Door Storage Compartment Illumination Bulb -L160-
- Front passenger side: Front Passenger Door Storage Compartment
Illumination Bulb -L161-
- Equipment levels
- Removing and installing. Refer to
→ Electrical Equipment; Rep. Gr.96; Lamps; Driver and Front Passenger
Door Storage Compartment Illumination Bulb L160/L161, Removing and
Installing.
READ NEXT:
Special tools and workshop equipment
required
Wedge Set -T10383-
Removing
- Carefully pry out the speaker trim -1-
from the door trim panel starting at the front using the Wedge
Set -T10383
Overview - Rear Door Trim Panel
1 - Rear Ashtray
Removing and installing
2 - Left Rear Power Window Button in Left Rear Door -E700-
Right: Right Rear Power Window Button in
Special tools and workshop equipment
required
Trim Removal Wedge -3409-
Removing
- Carefully pry the speaker trim -1-
out of the door trim panel using the Trim Removal Wedge -3409--arrow-
a
SEE MORE:
Removing
WARNING
Follow all Safety Precautions when working with
pyrotechnic components. Refer to
→ Chapter "Pyrotechnic Components Safety Precautions".
Before handling pyrotechnic components (for example,
disconnecting the connector), the person handling it
must "discharge st
Repair Information
Guidelines for Clean Working Conditions
Always clean the connection locations and the area around
them before loosening.
Clean the transmission and transmission components using
Cleaning Solution -D 009 401 04-.
Use lint-free cloths when cleaning, for example, the "WYPALL
X