Audi A6 Typ 4G: Tools and Equipment
READ NEXT:
General Information
Note
This list outlines the testers, tools and materials required
for expert refrigerant circuit repair work.
For tools and materials available from the distribution
ce
Service station/A/C Service Station (this illustration shows
), currently available A/C service stations. Refer to the Parts
Catalog (Tools; Special Tools and Equipment: A/C and Heating).
Work pro
Fin comb
Fill hoses
5/8"-18 UNF thread
Note
Use differently colored charging hoses (1800 mm long).
Have valve opener and spare seals to hand.
A charging hose in short version is also incl
SEE MORE:
Outer CV Joint, Removing
- Clamp the drive axle with protective jaws in a vise clamp.
- Open both clamping sleeves and remove protective joint boot
from outer joint.
- Strike a copper or brass drift -A-
on CV joint inner race with a hammer.
- Remove joint and protective joint b
WARNING
If tire sealant was used, then the wheel electronics
on that particular wheel must be replaced.
Audi vehicles have either a spare wheel or a wheel repair
kit, depending on equipment.
The wheel repair kit is located in the luggage compartment,
where the spare tire would be store
