Audi A6 Typ 4G: Wheel and Tire Guide
READ NEXT:
Audi A6, Type 4G, MY 2011 to 2015
Caution
Type 4F rims cannot be combined with type 4G rims.
Type 4G inner diameter 66.5 mm, hole circle 112 mm,
5 wheel bolts, tightening specification 120
WARNING
The following information applies only to the Audi
A6 model, type 4G, sedan and Avant (not for the A6
allroad). Not for Audi A7 Type 4G.
19" or larger wheels may only be installed
Caution
Type 4F rims cannot be combined with type 4G rims.
Type 4G inner diameter 66.5 mm, hole circle 112 mm,
5 wheel bolts, tightening specification 120 Nm
Type 4F inner diameter 57 mm,
SEE MORE:
Outer Rear Three-Point Seat Belt, Removing and Installing, Sedan
Removing
- Remove the rear outer belt end fitting. Refer to
→ Chapter "Rear Outer Belt End Fitting, Removing and Installing".
- Remove the rear shelf. Refer to
→ Chapter "Rear Shelf, Removing and Installing".
-
Note
The procedure refers to the air spring damper.
Special tools and workshop equipment
required
Air Spring Strut Adapter -T10157-
Air Suspension Strut Charger -VAS6231-
Steel gas bottle filled with argon or corgon
Note
Air spring shock absorbers are supplied as replacement pa
Audi A6, Type 4G, Sedan and Avant
