Audi A6 Typ 4G: Rear Final Drive, Differential
READ NEXT:
Overview - Final Drive
1 - Flywheel
Removing and installing, refer to
→ S tronic Transmission Internal Components; Rep. Gr.39; Seals; Left
Seal, Replacing
2 -&nbs
Transmission Fluid Level, Checking
Special tools and workshop equipment
required
Pressurized Gearbox Oil Filler Kit -VAS6617-
Used Oil Collection and Extraction Unit -SMN372500-
Protective eyewea
Left Flange Shaft, Removing and Installing
The transmission is removed.
Description of the procedure, refer to
→ S tronic Transmission Internal Components; Rep.
Gr.39; Differenti
SEE MORE:
Special tools and workshop equipment
required
Torque Wrench 1331 5-50Nm -VAG1331-
Torque Wrench 1332 40-200Nm -VAG1332-
Torque Wrench 1332 Insert - Ring Wrench - 21mm -VAG1332/7-
Removing
- Loosen the connection between the drive axle and wheel hub.
Refer to
→ Chapter "Drive Axle
Bumper Cover, Removing and Installing, Vehicles through MY 2014
Removing
- Remove the bolts -5-.
- Remove the bolts -1, 2 and 3-
on the bumper cover side plates -4-.
- Remove the cover in the luggage compartment side trim panel.
- Vehicles with a trailer hitch: Remove the cable
Final Drive
