Audi A6 Typ 4G: Self-Leveling Suspension
READ NEXT:
Component Location Overview - Electronic Damping
1 - Left Front Level Control System Sensor -G78-
Removing and installing. Refer to
→ Chapter "Left/Right Front Level Control Syst
Overview - Level Control System Sensor
1 - Nut
9 Nm
Self-locking
Replacing
2 - Bolt
9 Nm
3 - Rear Level Control System Sensor
Left side Left Rear Level Contro
Note
The air lines leading to the air springs/air spring shock absorbers
are tied inside the wiring harness.
Air lines, servicing. Refer to
→ Chapter "Air Line, Servicing".
Connect
SEE MORE:
B-Pillar Door Trim, Removing and Installing, Front Door
Removing
- Remove the window frame trim panel. Refer to
→ Body Interior; Rep. Gr.70; Front Door Trim Panels; Window
Frame Trim, Removing and Installing.
- Remove the window guide -1-
from the rear guide.
- Remo
General Information
Before beginning balancing, the following requirements must
be fulfilled.
Tire inflation pressure must be OK.
The tire tread must not be worn down on one side and should
be at least 4 mm deep.
The tire must not have any flat spots.
It is not possible to balance a flat spot
