Audi A6 Typ 4G: Battery, Starter, Generator, Cruise Control
READ NEXT:
Overview - Battery, Vehicles without High Voltage System
1 - Retaining Bracket
2 - Screw
18 Nm
3 - Battery
Disconnecting and connecting. Refer to
→ Ch
Battery, Disconnecting and Connecting, Vehicles without High Voltage
System
Caution
Accident risk.
When working on pyrotechnic components (such as
airbags and belt tensioners), the battery
Ground Cable with Battery Monitoring Control Module -J367-, Removing and
Installing, Vehicles without High Voltage System
Removing
- Turn off the ignition.
- Lift the luggage compartment fl
SEE MORE:
Brake Rotor Thickness
- Clean the brake rotor before determining the wear.
Note
The brake rotor vent holes must be free of brake dust and
dirt. It may be necessary to use a suitable tool to carefully
clean the holes. Do not use any force when doing so.
WARNING
Health Risk.
Al
Tire Pressure Monitoring with Pressure Sensor
WARNING
If tire sealant was used, then the wheel electronics
on that particular wheel must be replaced.
The wheel electronics, that is, the system pressure sensor,
forms a physical unit with the valve.
Note
The lettering on the wheel e
