Audi A6 Typ 4G: Trailer mode
Applies to: vehicles with peripheral cameras and trailer hitch
This view assists you in positioning the vehicle in
front of a trailer.
.10.png)
Fig. 138 Infotainment system: rear mode
Requirement: the trailer mode must be selected.
- Now you can position your vehicle in front of
the trailer
in General information. The orange
orientation line indicates
the expected path toward the trailer hitch. Use
the blue lines to help you estimate the distance
to the trailer hitch.
Setting the mode
Applies to: vehicles with peripheral cameras
- Select: [CAR] function button > (Car) Systems
control button > Driver assistance > Parking
aid > Front/rear camera switching > Auto or
Manual.
Auto - This view behind the vehicle (Rear mode)
is displayed automatically when you shift into reverse.
This view in front of the vehicle (Front
mode) is displayed automatically when you shift
into the forward gears.
Manual - When you switch the system on, the
view behind the vehicle (Rear mode) is always displayed and it does not switch
to the Front
mode when a forward gear is selected.
READ NEXT:
Applies to: vehicles with parking system plus/rearview camera/
peripheral camera
The display and warning tones can be adjusted in
the Infotainment.
Select: the [CAR] function button > (Car) Syste
Applies to: vehicles with parking system plus/rearview camera/
peripheral camera
There is an error in the system if the LED in the
button is blinking and you hear a
continuous
alarm for a few second
Applies to: vehicles with parking system plus/rearview camera/
peripheral cameras and trailer hitch
For vehicles using the trailer socket, the parking
system rear sensors are not activated when you
sh
SEE MORE:
A fuse that has blown will have metal strips that
hove burned through.
Fig. 204 Driver's side cockpit: cover
The fuses are located on front left and right of
the cockpit and behind the trim on the right side
of the luggage compartment.
Switch the ignition and all electrical equipment
off.
Check
Bearing Bushing and Guide Pin, Replacing, Steel Brakes 1LA/1LJ
Special tools and workshop equipment
required
Lithium grease. Refer to the Parts Catalog.
Removing
- Remove the brake pads. Refer to
→ Chapter "Brake Pads, Removing and Installing, Steel Brakes,
1LA/1LJ".
- Remove
